Electromagnetic coil SB1034/B310-B with thermosetting plug connection

How to correctly repair the electromagnetic coil?

I believe that many people are familiar with the electromagnetic coil. Its appearance has brought a lot of convenience to people, especially in many industrial industries. However, when it runs for a long time, it will inevitably lead to the failure of the equipment. Once it fails, it needs to be repaired correctly. How to repair it?

We need to pay attention to the maintenance of the electromagnetic coil, and the specific maintenance methods:

1. Test the voltage of the electromagnetic coil. If the test results show that the voltage of the final attraction coil of AC contactor is 90% of the rated voltage of electromagnetic coil, it shows that the product can be used normally.

2. When using the electromagnetic coil, it is necessary to check whether there is overheating. Once there is overheating, the surface of the product will be discolored and aged, which is caused by the short-circuit noise of the ramp. In order to avoid accidents, it is necessary to replace the electromagnetic coil in time.

3. It is necessary to check the wiping wire and lead wire of the electromagnetic coil. If there is a problem of disconnection or welding in it, it needs to be repaired in time to reduce the failure in future use.

The above is the introduction of the relevant contents of repairing the electromagnetic coil. I hope everyone can master its maintenance method after reading the article. Because the use of the electromagnetic coil is directly related to the normal power supply of the equipment, once the fault is found after inspection, it needs to be repaired immediately.