Hydraulic threaded plug-in one-way check valve DF08
Details
Area of application:machinery
Product alias:Hydraulic check valve
Applicable medium:petroleum products
Applicable temperature:110（℃）
Nominal pressure:1（MPa）
Nominal diameter:08（mm）
Installation form:screw thread
Working temperature:one
Type (channel location):Two-way formula
Parts and accessories:valve body
Flow direction:one-way
Type of drive:pulse
Form:plunger type
Pressure environment:ordinary pressure
Main material:cast iron
Points for attention
Installation position
One-way valve is a check valve. The installation position of swing check valve is not limited. It is usually installed in horizontal pipeline, but it can also be installed in vertical pipeline or inclined pipeline.
matters need attention
When installing the check valve, special attention should be paid to the flow direction of the medium, and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body, otherwise the normal flow of the medium will be cut off. The bottom valve should be installed at the bottom of the water pump suction pipeline.
When the check valve is closed, it will produce surge pressure in the pipeline, and in severe cases, it will cause damage to the valve, pipeline or equipment, especially for large-mouth pipeline or high-pressure pipeline, so it should attract the attention of the check valve users.
Check valves are only used for one-way opening and closing valves to prevent the reverse flow of fluid media on various pipelines or equipment.Installation position
One-way valve is a check valve. The installation position of swing check valve is not limited. It is usually installed in horizontal pipeline, but it can also be installed in vertical pipeline or inclined pipeline.
matters need attention
When installing the check valve, special attention should be paid to the flow direction of the medium, and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body, otherwise the normal flow of the medium will be cut off. The bottom valve should be installed at the bottom of the water pump suction pipeline.
When the check valve is closed, it will produce surge pressure in the pipeline, and in severe cases, it will cause damage to the valve, pipeline or equipment, especially for large-mouth pipeline or high-pressure pipeline, so it should attract the attention of the check valve users.
Check valves are only used for one-way opening and closing valves to prevent the reverse flow of fluid media on various pipelines or equipment.
Product specification
Company details
Company advantage
Transportation
FAQ
Related products
