Doosan Machinery Parts DH300-5-7 Hydraulic Solenoid Valve Coils

The solenoid valve coil is 52mm high and 13.2mm inside diameter.

One: Doosan DX60-7 walks without fast or slow gear. Causes:

1 The plunger is worn.

2 The solenoid valve for walking fast or slow is not energized or damaged.

3. The motor switches between high speed and low speed to send the card to the spool.

Supplement:

1 There are no quick gears on both sides at the same time, the solenoid valve is not energized, and it is energized. Is the valve core hairpin?

There are only fast gears on both sides at the same time. Whether the solenoid valve core is hairpin or not, the solenoid valve is always excited, which is a circuit problem.

3 One side has a high gear and the other side has a low gear, that is, the motor switches between high and low speed to issue the card.

Two: solenoid valve coil is an important part of solenoid valve equipment. Without it, the coil cannot operate. Generally speaking, the production of the two is in one factory, which is a finished product produced by the enterprise for another factory that needs to be used. Through the use of this equipment, various substances are controlled. Because the existence of this equipment has solved the problems that have been puzzling people and promoted the development speed of industry. This kind of equipment is quite flexible in control and has high control accuracy.

Third, in order to win more market space, manufacturers will store solenoid valve coils to meet the market demand. Storing products can bring rich profit space for manufacturers in a scarce market situation, but it is worth noting that storage needs to pay attention to details to ensure product quality, and it will be good to put them into the market. How to store solenoid valve coils can ensure product quality. The following is a detailed introduction: classified storage, Manufacturers need to pay attention to the effective classification of products when storing solenoid valve coils, so as to ensure that the products will not be affected as much as possible. If they exist with other components, there is a great possibility of mutual influence, which will lead to the pollution of products, and their own performance will be reduced. It is difficult to get profit margins when products are put into the market, so the significance of storage will not exist and it will not play a role in the development of manufacturers. Therefore, effective classification is needed during storage. Temperature control, reduce the influence of wet particles on solenoid valve coil products, do a comprehensive protection work at the storage location, and keep the storage location ventilated, so as to play a good control effect, reduce the formation of wet particles and ensure product quality.