MFZ12-25YC DC Wet-Type Solenoid Electromagnet for Hydraulic Directional Valve – 26W, φ23mm Bore, Rexroth/Yuken Compatible
MFZ12-25YC — DC Wet-Type Solenoid Electromagnet for Hydraulic Directional Valves
The MFZ12-25YC is a DC wet-type solenoid electromagnet designed as the power component for hydraulic solenoid directional valves. It is commonly matched with Rexroth NG6 and NG10 screw-connected directional valves, as well as Yuken-type valve bodies .
Confirmed Specifications (from multiple manufacturer sources)
-
Model: MFZ12-25YC
-
Rated voltage: 12V / 24V / 110V / 220V DC (varies by configuration)
-
Power consumption: ≤26 W
-
Coil bore diameter: φ23 mm
-
Rated force: ≥25 N
-
Rated stroke: 2.8 mm
-
Total stroke: ≥6.1 mm
-
Withstand static oil pressure: 21 MPa
-
Operating frequency: ≤12,000 T/h
-
Protection class: IP65
-
Socket standard: ISO4400 compliant; indicator-light and non-indicator versions available
Items Requiring Verification (Not Confirmed in Public Sources)
Your original specification mentions “Three Plugs” and “Height 36.4mm”. These details do not appear in any of the manufacturer datasheets or distributor listings reviewed. The standard socket for this series is ISO4400-compliant, which typically uses a 3-pin configuration, but the specific “three plugs” wording and the 36.4mm height must be confirmed against the physical unit or a supplier-specific drawing before publishing.
Application Notes
-
Suitable for continuous duty or intermittent periodic duty systems .
-
Can be installed in any orientation .
-
Supply voltage fluctuation range: 85%–110% .
-
When used in dual-solenoid valves, the two solenoids must not be energized simultaneously .
Ordering Notes
-
Confirm the required voltage (12V/24V/110V/220V) explicitly.
-
Verify whether the socket should include an indicator light.
-
If “three plugs” and “36.4mm height” are critical fitment dimensions for your customer base, obtain a supplier-specific dimensional drawing and state “dimensions per supplier drawing” in the listing.










