Milking machine accessories Afikin solenoid Valve metering pot accessories electronic metering coil

     For the solenoid valve coil is one of its important components, once the coil has a problem, it will affect the use of the entire solenoid valve, it is difficult to see the good or bad of the coil with the naked eye, we need to use some auxiliary tools to detect its good or bad, how to detect it specifically? Let's learn it together.

1, if you want to measure the quality of the coil, you can first use a multimeter to detect, and then use static check method to determine whether the coil can be used normally. During operation, connect the multimeter nib and the coil pin together and observe the value displayed on the multimeter display. If the value exceeds the rated value. If the value is lower than the rated value, it indicates that the coil has a short circuit. If the value is infinite, it indicates that the coil has an open circuit phenomenon, which indicates that the coil has been damaged and needs to be replaced.

2, want to detect the quality of the coil, you can also use another method. Use a 24 volt power supply to connect to the coil above, if you can hear the sound, then the coil is good, can normal suction and, if you do not hear the sound, then the coil has been broken.

3, we can also use a screwdriver to detect the quality of the coil, put the screwdriver on the periphery of the coil metal rod, the solenoid valve is powered on, if the screwdriver is magnetic, then it indicates that the coil is normal, and vice versa is bad.
The above is to detect the solenoid coil is good or bad method, if the coil has been damaged, the use of the solenoid valve will have an impact, so if the coil is found to be damaged, it is recommended to replace it immediately.