Hydraulic threaded plug-in one-way check valve CV16-20

(1) When using the threaded cartridge valve, we must recognize its total flow and pressure, and also pay attention to its total flow-pressure curve. If the model is too small, it will usually cause great pressure damage to the system software, which will make the system software hot. If the model is too large, it will lead to consumption in economic development;

(2) There are two kinds of rubber seals for threaded cartridge valves, fluorine rubber sealing is suitable for calcium phosphate grease substances, and nitrile rubber sealing is suitable for mineral oil substances;

(3) For the pressure value and the total flow value of the threaded cartridge valve, specific values can be set when selecting; if not specific, the manufacturer will set an initial value;

(4) Compared with the flat valve, the threaded cartridge valve is more afraid of environmental pollution. When designing the system software, we must do a good job in the design scheme of the filter device and carry out various cleaning before operation;

(5) The commutation rate of the threaded plug-in electromagnetic directional valve is slightly slower than that of the basic vacuum solenoid valve. For places where the rapid posture is specified, only the rapid threaded plug-in electromagnetic directional valve is selected, but the price is higher;

(6) Due to the limitation of volume and pattern, some characteristics of the threaded cartridge valve are not as good as those of the traditional valve, such as the hysteresis of the speed regulating valve, the shunt precision of the separation valve and the information response characteristics of the flow valve.

(7) Compared with flat hydraulic valve block and two-way cartridge valve block, the design scheme of threaded cartridge valve block has a higher difficulty coefficient. * Professional drawing software is used to complete the design scheme, and technical professional mobile phone software is used to check the hydraulic valve block;

(8) When designing the hydraulic valve block, it should be stipulated that the model and specification of the installed valve should be engraved on the edge of the threaded insertion hole on the hydraulic valve block to avoid reverse installation;

(9) Because mobile phones such as construction machinery and equipment have strict requirements on net weight, hydraulic valve blocks generally adopt aluminum alloy profile steel castings.